• Smart B3
  • SmartB3Matic

  • SmartB2
  • Smart4.0

  • PrintLamB1S
  • PrintLamB2S

Digital Thermal Lamination B3

Smart B3

The smallest laminator more friendly

  • Because it is more FRIENDLY laminator manufactured in EU.
  • Because its automatic registration system makes it easier for the operator to do so.
  • Because it only occupies 2 m2 IN USE and 1 m2 out of service.
  • Because it will incorporate a silent compressor.
  • Because you can stamp toner prints with your TAULER_FOIL system.
  • For its intuitive touch screen.
  • Because it incorporates a REVERSE MODE to correct possible errors
  • Because it incorporates non-stick rollers for ease of use.
  • Because it has an automatic boot system TAULER_GO ON

  • Manual entry and automatic registration.
  • Adjustable side shoulder.
  • Temperature control by sensor.
  • Pneumatic drive pressure roller.
  • Easy-to-adjust anti-scurling system.
  • Photocell that stops the machine in case of blade failure.
  • 2 full coil axles for quick change.
  • Full control of the machine by means of a PLC.
  • Electronically adjustable speed
  • Micorperforate cutting system and scissor roller

  • Maximum format: 450x690 mm
  • Minimum format: 200x200 mm
  • Speed: 2 – 12 m/min*
  • Paper weight: 130 to 400 gr/m2
  • Film thickness: 20 to 42 microns
  • Installed power: 2 Kw
  • Voltage: 230 v monastic 50 Hz
  • Security: CE standard protections, emergency shutdowns and safety sensors

  • Maximum height:150cm
  • Maximum width:80cm
  • Maximum length*: 170cm
  • Weight:400Kg

SmartB3
SmarB3Matic

SmartB3Matic

The smallest automatic laminator more friendly

  • Because it is more FRIENDLY laminator manufactured in EU.
  • Because its automatic registration system makes it easier for the operator to do so.
  • Because it only occupies 2 m2 IN USE and 1 m2 out of service.
  • Because it will incorporate a silent compressor.
  • Because you can stamp toner prints with your TAULER_FOIL system.
  • For its intuitive touch screen.
  • Because it incorporates a REVERSE MODE to correct possible errors
  • Because it incorporates non-stick rollers for ease of use.
  • Because it has an automatic boot system TAULER_GO ON

  • Fully automatic laminator in introduction and cutting.
  • Adjustable side brackets.
  • Temperature control by sensor.
  • Pneumatic drive pressure roller.
  • Easy-to-adjust anti-scurling system.
  • Photocell that stops the machine in case of blade failure.
  • 2 full coil axles for quick change.
  • Full control of the machine by means of a PLC.
  • Electronically adjustable speed
  • Micorperforate cutting system and scissor roller

  • Maximum format: 450x690 mm
  • Minimum format: 210x290 mm
  • Velocide: 2 – 12 m/min*
  • Paper weight: 130 to 400 gr/m2
  • Paper stack capacity: 22 cm
  • Film thickness: 20 to 42 microns
  • Installed power: 4 KW
  • Voltage: 230 v single-phase 50 Hz
  • Security: CE standard protections,
    emergency shutdowns and safety sensors

  • Maximum height:147cm
  • Maximum width:73cm
  • Maximum length:170cm
  • Weight:600kg

Digital & Offset Thermal Lamination B2

SmartB2

The small B2 laminator more friendly

  • Because it incorporates its TAULER_OIL system that improves laminate and reduces energy consumption
  • Because it incorporates a quick adjustment of the coil with the machine running
  • Because it incorporates the system TAULER_SHAFT system that facilitates the quick change of coils
  • Because it incorporates a quick adjustment of the coil with the machine running
  • Because you can stamp toner prints with your TAULER_FOIL system.
  • Because it will incorporate a silent compressor.
  • For its intuitive touch screen.
  • Because it incorporates a REVERSE MODE to correct possible errors
  • Because it incorporates non-stick rollers for ease of use.
  • Because it has an automatic boot system TAULER_GO ON

  • Manual entry and automatic registration.
  • Adjustable side shoulder.
  • Temperature control by sensor.
  • Pneumatic drive pressure roller.
  • Easy-to-adjust anti-scurling system.
  • Photocell that stops the machine in case of blade failure.
  • Full control of the machine by means of a PLC.
  • Electronically adjustable speed
  • Micorperforate cutting system and scissor roller

  • Maximum format:520x720
  • Minimum format:200x220mm
  • Speed *: 2 - 15 m/min
  • Paper weight:130 to 400g/m2
  • Film thickness: 20 to 42 microns
  • Pressure:Pneumatic
  • Installed power:3Kw
  • Voltage:230V single-phase 50Hz
  • Security: PROTECTIONs according to CE standard, emergency stoppages and safety sensors.

  • Maximum height:150cm
  • Maximum width:100cm
  • Maximum length*: 140cm
  • Weight:500Kg

SmartB2

SMT4.0

The most friendly automatic B2 laminator

  • Because it incorporates its TAULER_OIL system that improves laminate and reduces energy consumption
  • Because it incorporates a quick adjustment of the coil with the machine running
  • Because it incorporates the system TAULER_SHAFT system that facilitates the quick change of coils
  • Because it incorporates a quick adjustment of the coil with the machine running
  • Because you can stamp toner prints with your TAULER_FOIL system.
  • For its intuitive touch screen.
  • Because it incorporates a REVERSE MODE to correct possible errors
  • Because it has an automatic boot system TAULER_GO ON

  • Automatic introduction of front suction and 2 vacuum cleaners.
  • Adjustable side brackets.
  • Temperature control by sensor.
  • Pneumatic drive pressure roller.
  • Easy-to-adjust anti-scurling system.
  • Photocell that stops the machine in case of blade failure.
  • Full control of the machine by means of a PLC.
  • Electronically adjustable speed.
  • Micorperforated cutting system and scissor roller.

  • Maximum format: 550 x 790 mm
  • Minimum format: 220 x 250 mm
  • Speed: 2 – 25 m/min*
  • Paper weight: 130 to 400 gr/m2
  • Paper stack capacity: 600 mm
  • Film thickness: 20 to 42 microns
  • Installed power: 8 KW
  • Voltage: 400 v three-phase 50 Hz
  • Security: PROTECTIONs according to
    CE standard, emergency stoppages and safety sensors.

  • Height:155cm
  • Width:120cm
  • Length:250cm
  • Weight:850Kg

Offset Thermal Lamination B1S / B2S

Offset Lamination B1

The fastest, most friendly automatic B1 laminator

  • Because it incorporates its TAULER_OIL system that improves laminate and reduces energy consumption
  • Because it incorporates a quick adjustment of the coil with the machine running
  • Because it incorporates the system TAULER_SHAFT system that facilitates the quick change of coils
  • Because it incorporates a quick adjustment of the coil with the machine running
  • For its intuitive touch screen.
  • Because it incorporates a REVERSE MODE to correct possible errors
  • Because it has a boot system automáticaTAULER_GO ON

  • Automatic pneumatically operated opener.
  • Adjustable side brackets.
  • Temperature control by sensor.
  • Pneumatic drive pressure roller.
  • Easy-to-adjust anti-scurling system.
  • Photocell that stops the machine in case of blade failure.
  • Full control of the machine by means of a PLC.
  • Electronically adjustable speed.
  • Micorperforated cutting system and scissor roller.
  • Optional: Automatic sheet stacker.

  • Maximum format: 750x1050 mm
  • Minimum format: 220x250 mm
  • Speed: 2 – 35 m/min*
  • Paper weight: 130 to 450 gr/m2
  • Paper stack capacity: 530 mm
  • Film thickness: 20 to 42 microns
  • Installed power: 11 KW
  • Voltage: 400 v three-phase 50 Hz
  • Security: PROTECTIONs according to
    CE standard, emergency stoppages and safety sensors.

  • Maximum length:400cm
  • Maximum width:125cm
  • Maximum height:170cm
  • Working height:90cm
  • Machine weight:1,250Kg

PrintLamB1S
PrintLamB2

PrintLamB2S

The fastest and most friendly automatic B2 laminator

  • Because it incorporates its TAULER_OIL system that improves laminate and reduces energy consumption
  • Because it incorporates a quick adjustment of the coil with the machine running
  • Because it incorporates the system TAULER_SHAFT system that facilitates the quick change of coils
  • Because it incorporates a quick adjustment of the coil with the machine running
  • For its intuitive touch screen.
  • Because it incorporates a REVERSE MODE to correct possible errors
  • Because it has an automatic boot system TAULER_GO ON

  • Automatic pneumatically operated opener.
  • Adjustable side brackets.
  • Temperature control by sensor.
  • Pneumatic drive pressure roller.
  • Easy-to-adjust anti-scurling system.
  • Photocell that stops the machine in case of blade failure.
  • Full control of the machine by means of a PLC.
  • Electronically adjustable speed.
  • Micorperforated cutting system and scissor roller.
  • Optional: Automatic sheet stacker.

  • Maximum format: 520x740 mm
  • Minimum format: 220x250 mm
  • Speed: 2 – 35 m/min*
  • Paper weight: 130 to 450 gr/m2
  • Paper stack capacity: 530 mm
  • Film thickness: 20 to 42 microns
  • Installed power: 9 KW
  • Voltage: 400 v three-phase 50 Hz
  • Security: CE standard protections, emergency shutdowns and safety sensors.

  • Maximum height:170cm
  • Maximum width:125cm
  • Maximum length*: 270cm
  • Weight:1,000Kg

Contact us